PHONE: 06 874 9077  |  HOURS: MONDAY-FRIDAY 9AM-5PM

CHIP PROGRAMMING

During this high tech course, you will learn about digital & analogue inputs of a microprocessor and duty cycle control. You will learn how to make a simple circuit to convert a PWM signal into an analogue input or control a digital output. You will also learn how to write basic ECU software from scratch.

  • CHIP-PROGRAMMING
QUICK FACTS

COURSE ID: EMS2-1
DURATION: 2 DAYS

Prerequisites: You must have completed Firstline Diagnostics (EMS1-1), Modern Petrol Engine Control (EMS1-3), and Broadband Oxygen Sensor (EMS1-6).
Equipment: ATS scope, all test boards and chips provided.

 

scan tool level 2 training

LET US KNOW HERE

workshop mechanic doing online training
  • Learn more about what you can do with your Scan Tool through AECS Tools.

Quick Overview

  • We will teach you about the digital and analogue inputs of a microprocessor.
  • Learn about digital outputs, duty cycle control and analogue output.
  • Learn how to load preselected vehicles from the history log and how to access online workshop manuals from your tool. How to make a simple circuit to convert a PWM signal into an analogue input or output.
  • Program a microprocessor chip with self-written software to make outputs respond to an input signal, exactly how an engine ECU processes signals.
  • Live data, chip programming and how to debug.
  • How to set up and connect electronics before programming a chip, plus understanding electronic noise cancellation.
  • The knowledge in this training is invaluable for understanding and being able to manipulate and diagnose any computer-controlled electronic circuit. It will assist you to understand and what happens inside computer-controlled data diagnostics.

Comprehensive Overview

chip programming ems2-1
Live data used in Scan Tool - Level 2 training

Chip Programming 
In this seminar, we will teach you about chip hardware technology and CPU software flow. We will start with the basics of chip wiring diagrams, amplification circuits, through driving high current actuators with very low (chip) currents.

Software Programming
We will show you how to write closed-loop software and make it work in a simulator. You will be able to upload your software and make it work in real-time on a chip driven circuit. 

Building Circuits
Within the seminar, we will show you how to build an airmass sensor recalibration software and circuit, timed switching software and circuit, duty cycle controlled actuator software and circuit and E-OBD rear oxygen sensor simulating software.

aecs ems2-1 training

NEED MORE INFO?

The team at AECS are here to help.  Let us know how we can be of assistance.

Navigation

monthly technical Newsletter